Pic. 350. Individual elements of the headlight: 1 - screw, 8 Nm; 2 - locking clip; 3 - headlight housing; 4 - ventilation device; 5 - cover; 6 - holder of the side light lamp; 7 - double-filament lamp, H4; 8 - incandescent side light; 9 - reflector; 10 - rubber sealing gasket; 11 - headlamp diffuser; 12 - fastening screw; 13 - an electric motor that turns the headlight reflector
There is no need to completely replace the headlight if its lens breaks or the reflector is damaged. Headlight can be disassembled into components (pic. 350). Disassemble the headlight in the following order:
- remove the front turn signal;
- remove the grille;
- using a screwdriver, carefully remove the five clips of the diffuser, which are located around its perimeter;
- Remove the headlamp lens and rubber seal.
Installation carry out headlights in the reverse order of disassembly, following these recommendations:
- do not touch the reflector with bare hands;
- always replace the headlight lens rubber seal;
- install the diffuser mounting clips manually in their original places;
- after installing the headlight, be sure to adjust it.
Visitor comments