Contents: Removal ↓ Installation ↓
Removal
1. Remove the soundproofing casing.
2. Mark the direction of movement of the poly V-belt.
3. To loosen the tension of the poly V-belt, turn the tensioner in the direction shown by the arrow.
For engines with the letter designation BSE and BSF
Secure the tensioner using the rod clamp (1).
Continuation of the description of works for all engines
4. Remove the poly V-belt.
Installation
Installation is carried out in reverse order, and the following instructions must be observed.
Attention!
- On vehicles without air conditioning, the belt is installed last on the alternator pulley.
- On vehicles with air conditioning, the belt is installed last on the air conditioning compressor pulley.
Upon completion of the work, it is necessary to: start the engine and check the movement of the drive belt.
Belt drive without air conditioning compressor |
Belt drive with air conditioning compressor |
Visitor comments