Sequence of opening of air release valves
Amount of brake fluid, cm³ | |
| back right | 500 |
| back left | 500 |
| front right | 500 |
| front left | 500 |
Replace the brake fluid every 2 years. In this case, the brake fluid is pumped out of the system in the same way as when releasing air.
1. Use a bulb to suck out the brake fluid from the expansion tank to a level of approximately 10 mm.
2. Fill with new brake fluid.
3. Allow the brake fluid to flow out of the wheel brake cylinders, through the air release valves, in the correct sequence and quantity (see table. Sequence of opening of air release valves).
Attention! As soon as a sufficient amount of brake fluid flows out of the expansion tank, add new fluid each time.
Visitor comments