Attention! When working with a turbocharger, the following rules must be carefully observed:
Before disassembling, thoroughly clean the joints and adjacent surfaces.
Place the dismantled parts on a clean lining and cover them. Use film or paper for this purpose, do not use lint-free rags.
Winged structures must be carefully covered if repairs are not being carried out above them.
Install only clean parts.
Remove new parts from packaging immediately before installation.
Do not use parts that have been stored unpackaged.
When the device is open:
- if possible, avoid working with compressed air.
- if possible, do not move the vehicle.
The original information is posted on the website [www.VWManual.ru]
Visitor comments