Fuses 13 and 14 are located in the fuse box in the switch box, on the left side of the plenum box.
When removing and installing the fuel level sensor or fuel pump (fuel delivery module) from full or partially filled fuel tanks, the following should be taken into account:
WARNING: The fuel line is under pressure. Wear safety goggles and gloves to avoid injury and skin contact. Wrap a rag around the connection before disconnecting the hoses. Then release the pressure by gently loosening the connection.
Before starting work, install an exhaust hose from a switched on exhaust gas extraction system close to the fuel tank mounting hole. If there is no exhaust system for flue gas removal, a centrifugal fan can be used (the motor must be located away from the air flow) with a capacity of 15 m3/h
Visitor comments