Dismantling
Raise the front of the car.
Release the lower part of the shock absorber from the guide rod.
Put the car on wheels and unscrew the shock absorber bolt from the rod.
Raise the car, unscrew the shock absorber from the structure.
Installation
Check shock absorber before installation.
Install shock absorber, use new damper ring and washer. Pay attention to the fact that the side of the washer is facing towards the rubber. Tighten the nut with a torque of 30 Nm, put the cap on the nut.
Attention! It is necessary to lift the car without a shock absorber carefully, because. the upper axle joint may be damaged.
Visitor comments