Depending on the vehicle equipment, remove the noise insulation or the underrun protection bar. Remove lambda probe after catalytic converter -G130- -1-. Unscrew exhaust pipe at main catalytic converter -arrows-. Remove right driveshaft.
Unscrew securing bolts -1- and -2- for exhaust pipe support. Remove exhaust pipe support downwards.
Unscrew the nuts of the double clamp -arrows- and move it forwards along the exhaust pipe -1-.
Unscrew nuts -arrows- and pull exhaust pipe back. Press exhaust pipe back out of hanger -1-.
Unbolt lower power unit support -arrows-. Unscrew the fastening bolts for the cardan shaft on the bevel box. Press the cardan shaft to the side.
Lower the subframe. Remove the exhaust pipe towards the front.
Installation is carried out in the reverse order of removal.
Visitor comments