Installing an intake silencer
Push the intake silencer onto the heater in the direction of -arrow A- and secure it to the bracket in the direction of -arrow B-.
Removing circulation pump -V55-
Loosen clamp on circulation pump -V55- -1-. Unplug connector from circulation pump -V55- -2-.
Clamp off coolant hoses with clamps up to 25 mm -3094-.
Detach hose clamps for coolant hoses -1- at circulation pump -V55-. Remove circulation pump -V55-.
Removal and installation of the muffler with an arm
Loosen muffler pipes -A-. Remove screw -1 - (9±1.3 Nm) on the support -B- and put the exhaust pipe aside (end section) to the side. Remove screw -2- (8±0.8 Nm) muffler mountings -A-. Remove muffler -A-. Remove screws -3- (8±0.8 Nm) bracket mounting. Disconnect the muffler from the centering tabs and remove it. Installation is carried out in the reverse order.
Instructions: When installing the bracket, fix it correctly in the centering tabs.
Visitor comments