Removing
Attention! Observe fire safety measures!
Open the trunk lid.
Remove the clamps from the filler pipe and from the fuel tank vent pipe.
Disconnect the wire from the fuel gauge sensor.
Loosen the 4 fuel tank mounting bolts.
Disconnect fuel hose.
On vehicles with a petrol tap: close the petrol tap, remove the cotter pin and remove the tap handle.
Take out the tank.
Installation
Install the tank support.
Install the fuel tank and tighten the bolts of its fastening. Pull the fuel hose under the end of the frame, connect it to the tank and secure with a clamp.
On vehicles with a petrol tap: set the tap handle to the 45°position, put it on and pin it.
Connect the wire to the fuel level sensor.
Connect the hose and vent tube to the fuel tank, secure with clamps.
Close the trunk lid.
Visitor comments