Removing
Turn off the ignition and turn off the headlight using the switch.
With the ignition off, disconnect the ground wire from the battery (-).
Attention: Follow the instructions given in chapter «Removing and installing the battery».
Loosen the screw and unfasten from bumper cover air grille.
Release 2 screws, pull fog lamp forwards out of bumper housing and disconnect plug connector.
Installation
Installation is carried out in reverse order. At the same time ensure the correct position of the air grille and the fixing hooks.
Check the headlight adjustment at the service station and, if necessary, adjust the headlights.
Replacing an incandescent lamp
Remove fog lamp.
Turn the cover on the back of the fog lamp counterclockwise and remove.
Disconnect plug -1- at cover -2- for bulb.
Loosen and fold out the wire clamp -3-, remove the bulb from the reflector.
Insert a new incandescent lamp so that the locking lug coincides with the corresponding recess.
Further installation is carried out in the reverse order.
Check headlight operation with a new bulb.
Visitor comments