1 - self-locking nut
2 - rear door lock cover
3 - rear door trim
Removal
- Open the rear door and, using a plastic wedge, such as HAZET 1965-20, detach covers "2" and "6" from the trim.
- Remove screws "5".
- Using a plastic wedge, release the trim at the clamps "4" and remove the trim from the rear door.
Installation
- Check the clamps for damage and their correct positioning on the cladding; replace the clamps if necessary.
- Installation is carried out in reverse order.
4 - 10 clamps
5 - screw
6 — lid
(The article is published on this resource www.vwmanual.ru)
Visitor comments