Remove the fan shroud.
Remove the additional resistor.
Loosen the fan mounting bolt.
Remove the fan.
Clamp the heater hoses.
Disconnect the hoses from the heater.
Remove the lower instrument panel trim.
Disconnect the air ducts.
Unscrew the four heater mounting bolts.
Disconnect the heater control rods.
Remove the heater.
The heater is installed in the reverse order of removal, taking into account the following:
View the original on this resource [www.VWManual.ru]
- restore the fluid level in the cooling system and remove air from it;
- adjust the heater control rods.
Heater details:
A - cars with 4-cylinder engines;
B - cars with 5-cylinder engines.
1 - heater control lever trim;
2 — control lever bracket;
3 - fan casing;
4 — fan;
5 — heater casing;
6 — heater radiator.
Visitor comments