Front
To tow the vehicle, first remove the right grille at the bottom of the front bumper and screw in the towing eye. The towing eye is located with the on-board tool.
1. Press your fingers firmly in the direction of arrow 1 on the top edge and simultaneously pull the grate in the direction of arrow 2.
2. The eye has a left-hand thread. Screw the eye in until it stops and tighten it firmly with a wheel wrench.
3. After use, unscrew the eye and put it away with the on-board tool kit. Always carry the eye with you. Put the cover back in place.
4. Insert the lower part of the grille into the bumper. Then press the upper part of the grille into the bumper until the locking tabs are securely fixed.
Back
Rear eye (indicated by the arrow) is located under the rear bumper on the right side.
Visitor comments