The cooling system works with a separate expansion vessel.
The radiator is provided with two fans and with a small casing, in addition to the main fan located on the left, an additional one is installed on the other side.
The second fan is driven by a V-belt from the main fan.
1 - radiator
2 - V-belt
3 - driving ring
4 - cooling fan
5 - additional fan
6 - fan casing
7 - nut, 10 Nm
8 - upper coolant hose
9 - connecting plug
10 - lower coolant hose
11 - thermostat switch for cooling fan
1 - pulley bolt, 25 Nm
2 - water pump pulley
3 - bolt, 20 Nm
4 - water pump
5 - throttle body
6 - O-ring, which must always be replaced
7 - from the cylinder head
8 - coolant starting pump
9 - connecting plug
10 - rubber support
11 - from the heat exchanger
12 - to the heat exchanger
13 - bolt, 10 Nm
14 - cover
15 - expansion vessel
16 - locking cover
17 - upper coolant hose
18 - lower coolant hose
19 - thermostat housing
20 - to the cylinder block
21 - oil cooler
22 - drain plug for coolant
23 - coolant tube
1 - screw, 20 Im
2 - screw, 10 Nm
3 - coolant pump
4 - seal, always to be replaced
5 - O-ring, must be replaced
6 - top hose for coolant supply
7 - connecting fitting
8 - sealing ring, subject to mandatory replacement
9 - thermal switch, 25 Nm
10 - temperature sensor, 25 Nm
11 - from the heat exchanger
12 - to the heat exchanger
13 - pipe for supplying coolant
14 - oil cooler
15 - lower hose for coolant supply
16 - thermostat
17 - console for guiding auxiliary pump
Visitor comments