Contents: Dismantling ↓ Installation ↓
Dismantling
Disconnect the battery from ground.
Raise the rear of the vehicle.
Remove the lower engine cover.
Open the cable clamp on the magnetic switch.
Mark the electrical wires and remove them or, accordingly, screw them on.
Unscrew the starter mounting bolts and pull it out.
Installation
Insert the starter and screw it on.
Connect the electrical wires to the terminals or, accordingly, screw them on.
(27-349) Attach the wires to the magnetic switch with cable clamp 1.
Install the engine cover.
Lower the car.
Connect the battery to ground.
(The original article is posted on the website: VWmanual)
Visitor comments