Dismantling
Disconnect the battery from the ground, move the clamping bracket of the plug to the side, remove the plug, remove the cable mount.
Unscrew the clamping plate bolt and move the generator down. Remove the V-belt from the alternator.
Unscrew the fixing bolt of the generator, pull out the generator.
Installation
Install the generator and screw it to the holder, put on the V-belt, mount the tightening bar, tighten the V-belt.
Connect the plug and secure with a clamp, secure the cable correctly to the generator to prevent it from breaking.
Connect battery to ground.
Visitor comments