Remove the wiper blade..
From the closed side of the rubber nozzle, compress both steel slats with pliers (see picture); release from the upper clip and pull the rubber together with the rails from the remaining clips of the wiper blade.
(92-015) fasten the new rubber cap to the bottom clips of the brush.
Insert both rails into the first groove of the lining so that the grooves in the rails look towards the rubber, and engage them with the groove spikes.
(92-016) squeeze both rails and rubber with pliers and insert into the upper clamp so that the spikes on both sides enter the locking grooves (arrow).
Visitor comments