Contents: Dismantling ↓ Installation ↓
Dismantling
Disconnect the battery from ground.
Remove the steering wheel, see. "Removal and installation the steering wheel".
(94-233) unscrew the upper and lower parts of the steering column cover (arrows), to remove the lower part additionally
Unscrew the clamp on the casing pipe.
Unscrew the turn signal switch bolts and remove the switches.
Installation
Install the turn signal and windshield wiper handles and screw them into place.
Install the upper and lower parts of the casing, and additionally secure the lower part with a clamp to the casing pipe.
Connect the battery to ground.
Install the steering wheel, see the relevant section.
(94-228) There should be a gap of a = 2-4 mm between the steering wheel and the turn signal switch.
Visitor comments