Removing
Remove the gearshift drive.
Unlock and disconnect the plug connection.
Unlock the solenoid in the mount and remove it from the locking lever 1 and the gear shift actuator (pic. 3.20).
Installation
Place the solenoid lever 2 vertically upwards.
Slide the solenoid from the front into the shift actuator mount.
Connect lever 2 to blocking lever 1 (pic. 3.20).
Push the solenoid all the way into the shift actuator until it locks into place (pic. 3.21).
Check that the solenoid is fully seated in the mount and that the lever is engaged with the locking lever.
Visitor comments