Contents: Removal ↓ Installation ↓
Fig. 6.11. Brake vacuum pump V192:
1 - brake boost pressure sensor; 2 - vacuum hose; 3 - brake booster relay; 4 - check valve; 5 - clamp; 6 - clip; 7 - emphasis; 8 - brake vacuum pump; 9 - emphasis; 10 - bracket; 11 - nut; 12 - Hexagon head bolt.
NOTE: This pump is only installed on cars with a gasoline engine and automatic transmission. Repair of the brake vacuum pump is not carried out. If there is an error, replace the brake vacuum pump.
Removal
Disconnect connector 1.
Remove vacuum hose 2 from brake vacuum pump V192 (Fig. 6.12).
Unlock the clip in the direction of the arrow and remove (Fig. 6.13).
Remove the V192 brake vacuum pump upwards from the holder.
Installation
Installation is carried out in reverse order.
(The original text can be found at: «www.vwmanual.ru»)
Visitor comments