Figure 12.52. High-roof van rear door lock. 1 - Ledge; 2 - Locking rod; 3 - Castle; 4 - Clamps.
1. Loosen the mounting screw and remove the inner handle.
Figure 12.50. Secondary lock handle mounting screw.
2. Disconnect the clips from the lock pins to release the locking rods.
Figure 12.51. High roof van rear door locking rods: 1 - Clamps; 2 - Locking pins; 3 - Locking rods; 4 - Castle.
3. Remove the bottom rod from the door.
4. Remove the top track and remove the top rod from the door.
5. Unscrew the two screws and remove the lock from the door opening.
Figure 12.53. High roof van lock mounting screws.
6. Installation is carried out by performing the above steps in reverse order. Adjust the locking rods as described in Section 15.
7. The door counter plates can be adjusted by moving them within their oblong bolt holes to ensure smooth and firm door closing. If the door rattles when closing, contact Section 13, paragraph 9.
Visitor comments