Van sliding door central locking — removal and installation (VW Lt 28)

1. Lock the central locking latch by pulling the inner handle.

2. Pull the spring tensioner arms forward towards the lock, then disconnect it from the inner door panel.

3. Remove the lock cable from the guide.

4. Loosen the mounting screws and remove the central lock.

Figure 12.57. Central lock of a van sliding door. The mounting screws are indicated by arrows (Section 18): 12 - Cable; 13 - Spring tensioner lever; 14 - Inner door panel; 15 - Guide.

5. Installation is carried out by performing the above steps in reverse order.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

The text has been checked: Kolesnikov Artem

Previous articles
Van sliding door lock — removal, installation and adjustment
High-roof van secondary rear door lock — removal, installation and adjustment
High-roof van rear door primary lock — removal, installation and adjustment
Secondary lock for the rear door of a high van — removal, installation and adjustment
Primary lock of the rear door of a high van — removal and installation
Tall van rear door — removal, installation and adjustment

Next articles
Van sliding door — removal, disassembly, assembly and adjustment

Van sliding door central locking — removal and installation (VW Lt 28)

Visitor comments