Contents: Removal ↓ Installation ↓
Removal
Use a screwdriver to push out the inner door opening mechanism handle cup and remove the Phillips head screw from the cup.
Remove the window lift handle. To do this, remove the plastic cover of the handle and unscrew the bolt.
Remove the door trim (press with a screwdriver).
Attention! On the passenger door (and, in some cases, the driver) the armrest holder is secured. When removing it, the door trim needs to be pulled up slightly.
Installation
Lightly coat the inside of the door with universal glue and glue the PVC film.
[The original text can be found at VWMANUAL.ru]
Attention! The film must be well stretched at the bottom of the opening.
Install the door trim.
Attention! The upholstery must be installed with the armrest holder (if any) on the bracket cover.
Position the window lift handle so that when the window is closed it points vertically downwards. Put on the handle cover.
Install the internal door lock mechanism and handle cup.
Visitor comments