Place the seal around the glass. If there is a decorative frame, insert it into the seal.
1 - decorative frame; 2 - glass; 3 - groove
Insert a bundle or twisted cord into groove 3. To do this, loosen the seal with a screwdriver and insert a tourniquet around the perimeter. The tourniquet should lie deep in the groove, and its ends should be located in the middle of the glass.
Insert the glass and slowly pull out the harness; in this case, the edges of the seal should be positioned around the body flange.
While pulling the harness from the inside of the car, the assistant should hit the glass with his palm from the outside to insert it.
Visitor comments