Removing the air filter housing
Unscrew the nuts securing the air filter housing to the carburetor and remove them together with the washers.
Remove the air filter housing.
Installation
Install the air filter housing. Make sure the O-ring is in contact with the carburetor.
Install and tighten new self-locking nuts securing the air cleaner housing.
Connect the crankcase breather hose to the air filter housing.
Removing the air filter kit
Loosen the nuts securing the air filter housing to the carburetor.
Loosen the air filter cover clips with a screwdriver and disconnect the gray vacuum hose.
Disconnect the crankcase ventilation hose from the air filter housing.
Disconnect both intake manifold hoses from the air filter housing.
Disconnect the upper air filter clip.
Remove the complete air filter.
Installation
The air filter housing snaps into the lower latches. A rubber ring must be put on each latch on the bottom of the air filter.
Install the air filter housing, let it snap into place and secure with clips.
Clamp off both intake manifold heating hoses.
Connect the gray vacuum hose to the air filter cover.
Install the air filter housing with new self-locking nuts on the carburetor. Make sure the O-ring is in contact with the carburetor.
Connect the crankcase ventilation hose to the filter housing.
Visitor comments