Instructions: After installing the exhaust system components, check for internal stress in the system and for sufficient distance between the system components and the body. If necessary, unscrew the double clamp and align the exhaust pipe and muffler so that there is sufficient distance to the body and the fasteners are loaded evenly. Replace the self-locking nuts.
- 1 - 25 Nm
- 2 - Intake pipe
- 3 - Rear muffler
- 4 - Suspension with mounting ring, replace if damaged
- 5 - 25 Nm
- 6 - Tunnel crossbar
- 7 - Suspension, replace if damaged
- 8 - Double clamp, 25 Nm, install in the correct position
The information is presented on the website [vwmanual]
Visitor comments