Adaptive undercarriage control system DCC components and their installation locations (VW Tiguan 1)

Caution: It is prohibited to swap body acceleration sensors.

• 1 - Damping adjustment button "E387", installation location: on the center console, in front of the gearshift lever
• 2 - Shock absorber with damping adjustment valve for the rear right wheel "N339"
• 3 - Rear body acceleration sensor "G343", installation location: on the support of the rear left shock absorber
• 4 - Electronic damping control unit "J250", installation location: behind the left side trim of the luggage compartment, after replacing the electronic damping control unit "J250", it is necessary to perform the basic installation of the adaptive chassis control system DCC
• 5 - Shock absorber with damping adjustment valve for the rear left wheel "N338"
• 6 - Rear left ride height sensor "G76", after removing and installing the rear left ride height sensor "G76" it is necessary to perform the basic installation of the adaptive chassis control system DCC
• 7 - Front left body acceleration sensor "G341"
• 8 - Shock absorber with damping adjustment valve of the front left wheel "N336"
• 9 - Front left ride height sensor "G78" and front right ride height sensor "G289", after removing and installing the front left ride height sensor -G78- and the front right ride height sensor "G289", it is necessary to perform the basic installation of the adaptive chassis control system DCC
• 10 - Shock absorber with damping adjustment valve, front right wheel N337-
• 11 - Front right body acceleration sensor "G342"

[The original material is available on the portal VWManual]