Instructions: Please note that depending on the model, removal and installation of the front bumper trim occurs with some differences.
Disconnect the mudguards at the attachment points to the bumper trim. Disconnect the fastenings of the pads "5" at the joints with the bumper trim. Unscrew the bolts "4" located behind the pads. Unscrew the bolts "2" from below. Unscrew the bolts "3". Further operations are possible only with the participation of an assistant. Pull the bumper by the edges "arrow" outward and remove it from the fastenings in the bracket "4". With the help of a second mechanic, remove the trim from the fastening points in the headlight area with a parallel movement. Disconnect all existing electrical connectors and hoses.
Installation is carried out in the reverse order. Pressing on the edges of the bumper, insert it into the mounting slots.
Instructions: When installing the front bumper trim, ensure that it fits on the side guides. It is necessary to maintain uniformity and proper repair gap sizes.
The original text can be found on the portal: VWManual
Visitor comments