Open the hood. Connector "2" is located on the front support panel "6" above the headlight on the driver's side. Disconnect the cable connector "2" from the panel "6" by moving it in the direction of "arrow b". Remove cables -1 and 5- from the connector. Turn cable "1" in the direction of "arrow a". Remove ball "3" of cable "1" from socket "4" connected to cable "5".
Instructions: When assembling, make sure that the cable sheaths are not twisted and that the connection point is secured to the panel in the correct position. Bushings -6 and 7- must be installed in the correct position. Before closing the hood, check the operation of the cable drive lever.
[The original material is available on the portal vwmanual.ru]
Visitor comments