Contents: Removal ↓ Installation ↓
The ATE brake caliper for LT 28/35 vehicles is shown in the figure 8.12.
Figure 8.12. ATE brake caliper for LT 28/35 vehicles: 1 - Lids; 2 - Guide pins; 3 - Bushing; 4.11- Protective covers; 5 - Air bleed valve; 6 - Brake caliper; 7 - Brake caliper support; 8 - Retainer; 9 - Seal; 10 - Piston.
Removal
1. Press the piston out of the brake caliper using compressed air (arrow) (figure 8.13). Place a wooden block so as not to damage the piston when removing it.
Figure 8.13. Press the piston out of the brake caliper using compressed air (arrow).
2. Remove the sealing ring using feeler gauge 3409 (figure 8.14).
Figure 8.14. Remove the sealing ring using feeler gauge 3409.
Installation
3. Lubricate the piston and sealing ring with paste G 052 150 A2 before installation.
[The original text can be found at: VWMANUAL.ru]
4. Install the sealing ring into the brake caliper.
5. Install the protective cover with the outer sealing lip on the piston (figure 3.15).
Figure 8.15. Install the protective cover with the outer sealing lip on the piston.
6. Insert the inner sealing lip into the cylinder groove using feeler gauge 3409 (figure 8.16).
Figure 8.16. Insert the inner sealing lip into the cylinder groove using feeler gauge 3409.
7. Press the piston into the brake caliper (figure 8.17).
Figure 8.17. Press the piston into the brake caliper.
Visitor comments