Clearing fault memory and completing output (VW Lt 2d)

Before performing these procedures, it is necessary to interrogate the fault memory.

Clearing the fault memory

1. Connect the VAG 1551 tester. The display should show the following information:

• LT HELP Diagnostics
• Dial function XX

2. Enter "05" to select the "Clear Fault Memory" function. The display should show the following information:

• LT Q diagnostics
• 05 - Clearing the fault memory

3. Confirm by pressing the "Q" button. The display should show the following information:

• LT Diagnostics →
• Fault memory cleared

4. The fault memory is cleared. Press "→". The display should show the following information:

• LT HELP Diagnostics
• Dial function XX

Completing the output

5. Press "06" to select the "Complete Output" function. The display should show the following information:

(The information is presented on the website VWManual.ru)

• LT Q diagnostics
• 06 — Completion of withdrawal

6. Confirm by pressing the "Q" button. The display should show the following information:

• Diagnostics of LT HELP
• Dial function XX

7. Turn off the ignition and disconnect the tester. Turn on the ignition. The ABS and EDL warning lights should go out after 2 seconds.