(DV engine - 75 kW)
Recharging pressure: 750 hPa.
| Basic adjustment | Rotation speed (rpm) | Values |
| Advance device stroke | 1500 | 2.3 - 2.7 mm |
| Feed pump pressure | 1500 | 0.55 - 0.61 MPa |
| Total load without recharge pressure | 600 | 23.5 - 24.5 cm³/1000 strokes |
| Total load with recharge pressure | 1500 | 41.5 - 42.5 cm³/1000 strokes |
| Idle speed limitation | 375 | 6 - 10 cm³/1000 strokes |
| Max limit. speed | 2400 | 10 - 14 cm³/1000 strokes |
| Starting overload | 100 | min. 35 cm³/1000 strokes |
Injection advance regulator
| Rotation speed (rpm) | Lead increase (mm) |
| 1000 | 0,5 - 1,3 |
| 1500 | 2,3 - 2,7 |
| 2150 | 4,4 - 5,2 |
Supply pressure
| Rotation speed (rpm) | Feed pump pressure (MPa) |
| 600 | 0,31 - 0,37 |
| 1500 | 0,55 - 0,61 |
| 2150 | 0,72 - 0,78 |
Overflow valve overflow rate
| Rotation speed (rpm) | Consumption (cm³/10 s) |
| 600 | 41 - 83 |
| 2150 | 55 - 138 |
Final adjustment
| Area of work | Rotation speed (rpm) | Consumption (cm³/1000 strokes) | Recharging pressure (hPa) |
| Maximum | 750 | 32,5 - 33,5 | 300 |
| (lDA stroke: 4.5 mm) | |||
| 2600 | 0 - 3 | 750 | |
| 2400 | 10 - 14 | 750 | |
| 2300 | 20,5 - 30,5 | 750 | |
| 2150 | 31,5 - 37,5 | 750 | |
| 750 | 32,5 - 33,5 | 300 | |
| 600 | 38 - 41 | 750 | |
| 600 | 23,5 - 24,5 | — | |
| Stop | 375 | 0 - 3 | — |
| Idling | 375 | 6 - 10 | — |
| 450 | 0 - 3 | — | |
| End of cutoff | 400 | min. 25 | — |
| 500 | max. 27 | — | |
Visitor comments