Tightening torques
| Head mounting bolts: | according to the instructions in subsection 2.2. "Maintenance and repair". |
| Camshaft cover: | 10 Nm |
| Crankshaft bearings: | 65 Nm |
| Cranks: - 1st stage: | 30 Nm |
| - Stage 2: | angle 180°. |
| Fuel pump drive gear mounting screw on camshaft: | 100 Nm |
| Camshaft Drive Gear Screw: | 80 Nm |
| Central screw of the belt pulley on the crankshaft: | 460 Nm |
| Lower Casing Bolts: | 20 Nm |
| flywheel bolts: - Stage 1: | 70 Nm |
| - Stage 2: | angle 90°. |
| Camshaft Bearing Nuts: | 20 Nm |
Injection system
| Fuel pump gear: | 45 Nm |
| Pump mounting screws: | 25 Nm |
| Injector wires: | 25 Nm |
| Nozzle holders: | 70 Nm |
| Glow plugs: | 30 Nm |
[The original text is available on the portal VWMANUAL]
Visitor comments