1. Connect tester VAG 1767 or tester VAG 1367 with clamps V AG 1367/8 (pic. 3.43).
2. Connect tester VAG 15511 (V.A.G 1552) and dial «01» to select a function «Address word» engine control unit. The engine must be running at idle. The display should show the following information:
3. Click «04» to select a function «Home position setting» and confirm by pressing the button «Q». The display should show the following information:
4. Click «001» function selection length «Group 1 display» and press «Q». The display should show the following information:
5. Continue the test only after the appearance of the eight-digit number 00000000 field 4 of the display.
6. Wait until the control unit increases the crankshaft speed within 1400-1600 rpm.
7. Check the ignition timing. Specification value: 3-8°before TDC.
8. Adjust the ignition timing by turning the ignition distributor. Adjustment value: 6±1°before TDC.
9. Click «→»
10. Click «06» to select a function «Output Completion» and confirm by pressing the button «Q».
Visitor comments