In case of malfunction - the water pump does not work - in addition to checking the water level, connections and electrical fuses, the following instructions must be followed:
Check fuse. The water fuse is located on the pump under the casing in the right water cabinet.
The water pump is switched off by an electronic circuit when the water change is less than 2 liters. If the electronics are faulty, a shutdown can occur even with a larger supply of water.
(97-682) to check, you need to connect a test lamp to the yellow conductor 4 of the indicator device (to do this, pull out the device). Do not disconnect the plug connector.
(97-683) if one of the LEDs K55-K57 lights up, the connected control lamp should also light up (the volume of water is less than 2 liters).
If the indicator lamp does not light up as described, the indicator instrument with indicator lamps must be replaced.
Visitor comments