Removing
Remove the front main gear.
Attach the VW 771 universal tool to the left flanged shaft.
Remove the left flange shaft (pic. 3.158).
Remove the flange shaft seal using the VW 771 universal tool and 771/37 puller (pic. 3.159).
Installation
Press in the new O-ring until it stops (pic. 3.160).
Fill the space between the sealing lips and dust seal halfway with grease G 052 128 A1.
Check the flange shaft boot for damage before installation. If necessary, replace the boot.
Using pliers, remove the old thrust ring A from the groove of the flanged shaft (pic. 3.161).
Do not stretch the new thrust ring, install it in the groove of the flanged shaft.
Press in the flanged shaft with a plastic mallet.
Install the front final drive.
Check the transmission oil level in the front final drive.
Visitor comments