Figure 5.3. Disconnecting the clutch cable from the clutch release lever.
2. Disconnect the cable end from the clutch release lever (see photos).
Photo 3.2A. Disconnecting the clutch cable from the clutch release lever.
Photo 3.2B. Disconnected clutch cable.
3. Remove the coil spring and boot from the cable.
4. Remove the nut closest to the end of the cable and pull it through the eye on the gearbox.
5. Disconnect the cable from the clutch pedal by unhooking it from the pedal lever.
6. Remove the front radiator grille.
7. Pull the cable out from under the car, pulling it through the bracket on the bottom and the rubber bushings (see photo).
Figure 5.4. The bracket holding the clutch cable to the bottom of the car.
Photo 3.7. Removing the clutch cable.
8. Installing a new cable is done in reverse order. When finished, adjust it as described in previous section.
Visitor comments