Cooling system - models with 2.4L engine
General information
| System type | Sealed, with expansion tank. The water pump is driven by the camshaft drive belt. The cooling fan is located on the crankshaft |
Thermostat
| Temperature at which opening begins | 87°C |
| Fully open temperature | 100°C |
| Thermostat valve stroke | 8 mm |
| System capacity | 13 liters |
| Expansion tank cap valve opening pressure | 1.2-1.5 bar |
Tightening torque (Nm)
| Water pump bolts | 25 |
| Thermostat housing bolts | 10 |
| Temperature sensor | 10 |
| The casing at the rear of the cylinder head | 20 |
| Fan mounting bolts | 25 |
| Fan ring | 20 |
| Casing bolts | 10 |
| Radiator support bracket | 25 |
| Nice radiator cap | 10 |
Visitor comments