Unscrew the bellows.
Attention! The mandrel should be installed exactly on the CV joint sprocket.
With the help of a mandrel (A) remove the CV joint from the drive shaft.
Pull off (press out) outer CV joint VL100.
Using a drift, remove the boot from the hinge.
For shafts with CV joint VL107: use a drift to remove the cover from the joint.
Removing the inner hinge cover
Continuation of the description of work for drive shafts with any type of CV joints:
- Remove retaining ring.
- Remove both clamps and move the boot towards the outer CV joint.
Visitor comments