Removing
1. Remove the acoustic cover.
2. Set the hood latch console to the service position.
3. Disconnect connector (1) and unscrew the screws securing the fan bracket (arrows).
4. Remove the fan bracket together with the fans upwards.
5. Disconnect connector (2) and set aside the wiring.
6. Detach the connector mount (1) away from the fan bracket and lay the cables aside.
7. Unscrew the nuts (arrows) and remove the fans.
Installation
Installation is carried out in the reverse order.
Tightening torques:
- Radiator fan to bracket: 10 Nm.
- Fan bracket to radiator: 5 Nm.
Visitor comments