| Malfunction | Cause | Solution |
| The clutch is slipping | The pedal free play is too small | Increase free play to 20 mm |
| The driven disk linings have hardened or become oily | Replace the driven disk | |
| The diaphragm spring is weakened | Replace the pressure plate | |
| The clutch "leads" | The pedal free play is too great | Reduce free play to 10 mm |
| Due to wear, the driven disk lining sticks | Replace the driven disk | |
| Dry or damaged splines on the gearbox input shaft | Clean the splines, remove burrs, coat the splines with M0S2 based paste | |
| The clutch cable or release lever is sticking | Clean the parts and lubricate them with a general purpose grease | |
| The driven disk is beating | Replace the disk | |
| The clutch cable is sticking | Replace the cable | |
| Jerks when the clutch is engaged | The gearbox is poorly secured to the supports | Tighten the gearbox mounting bolts |
| The clutch cable is routed incorrectly | Route the cable correctly and adjust it | |
| The release bearing is damaged | Replace the bearing | |
| The load on the pressure plate is unevenly distributed | Replace the pressure plate | |
| Severe and uneven wear of the driven disk | Replace the disk | |
| Noise when disengaging the clutch | The clutch release shaft is not sufficiently lubricated. | Lubricate the shaft bearing bushings |
| Clutch noise when disengaged | The release bearing is damaged | Replace the bearing |
| The driven disk hits the pressure plate | Replace the driven disk |
[View the original on the website VWManual.ru]
Visitor comments