Windshield
The windshield wipers and washers are controlled by a lever on the right side of the steering column.
The lever has five height positions that regulate the operation of the windshield wiper:
- 0 - Disabled.
- 1 - Intermittent wiper movement; the intervals of the windshield wiper strokes can be adjusted using switch A (to the right - shorter intervals, to the left - longer).
- 2 - Low operating speed;
- 3 - High speed of operation;
- 4 - Single stroke of the windshield wiper.
To turn on the washer, pull the lever towards you to position 5. The windshield wiper also operates simultaneously with the washer.
If you release the lever, the washer stops working and the wiper continues to work for about 4 seconds.
Note: Do not use glass cleaner on dry glass, as this may scratch the glass.
If the vehicle is equipped with a rain sensor, the wiper strokes are controlled automatically according to the intensity of the rain. The sensitivity of the rain sensor can be individually adjusted using switch A.
Rear window
To turn on the rear wiper, move the lever to position 6 or 7. In position 6, the wiper operates for approximately 6 seconds. In position 7, the wiper and washer operate continuously. The washer will operate together with the wiper for as long as you hold the lever.
Note: Do not use the rear window wiper if the glass is dry, as this may scratch the glass.
Headlights
The headlights are washed every time the windshield washer is turned on. The headlight lenses should be periodically cleaned of debris and stuck insects.
Visitor comments