Dismantling
Raise the rear of the car.
Remove the roof of the engine compartment.
Spray rust-dissolving agent on all exhaust system bolts and nuts.
Release the clamps connecting the exhaust pipe and muffler.
Unscrew the muffler from the rubber-metal supports, remove it from the exhaust pipe to the right and pull it out together with the exhaust pipe.
Unscrew the exhaust pipe from the exhaust outlet and remove it.
Unscrew the exhaust pipe from the muffler.
Installation
Replace all self-locking nuts, exhaust pipe and exhaust pipe gaskets.
Check the rubber-metal bearings for porosity and tight fit.
Screw the exhaust pipe to the muffler with a new gasket.
Insert the muffler and put on the exhaust pipe.
Screw the muffler to the exhaust pipe.
Tighten the clamps.
Install the roof of the engine compartment, lower the car.
Visitor comments