Figure 9.33. Headlight: 1 - Lid; 2 - Side light bulb; 3 - Fog light bulb; 4 - Dual filament headlight bulb; 5 - Screws; 6 - Seal; 7 - Fasteners; 8 - Diffuser; 9 - Reflector.
Removal
1. Remove the turn signal 1 (figure 9.34).
Figure 9.34. Remove turn signal 1.
2. Unscrew the four screws (arrows) (figure 9.35). Pull the oara forward.
Figure 9.35. Remove the four screws (arrows).
3. Disconnect the tube 1 for the headlight range adjuster and the wiring connector 2 (figure 9.36).
Figure 9.36. Disconnect tube 1 for the headlight range adjuster and wiring connector 2.
Installation
4. Installation is carried out in the reverse order of removal.
Adjustment
5. The headlight position is adjusted using a screwdriver with two screws 1 and 2 (figure 9.37).
Figure 9.37. Adjusting the headlight position: 1 - Lateral adjustment; 2 - Height adjustment.
Visitor comments