4-cylinder petrol engines
Removal
1. Disconnect the negative cable from the battery.
2. Unscrew nut 1 from terminal 30 of the solenoid relay, remove washer 2 and disconnect wires 3 and 4 (figure 9.1).
Figure 9.1. Unscrew nut 1 from terminal 30 of the solenoid relay, remove washer 2 and disconnect wires 3 and 4.
3. Remove the plastic cover 1 from the solenoid relay, unscrew the nut 2 from terminal 50 of the solenoid relay, remove the washer 3 and disconnect the wire 4 (figure 9.2).
Figure 9.2. Remove plastic cover 1 from the solenoid relay, unscrew nut 2 from terminal 50 of the solenoid relay, remove washer 3 and disconnect wire 4.
4. Unscrew bolts 2 and remove starter 1 (figure 9.3).
Figure 9.3. Unscrew bolts 2 and remove starter 1.
Installation
5. Installation is carried out in the reverse order of removal.
5-cylinder diesel engines
Removal
6. Disconnect the negative cable from the battery.
(The original article is available at: www.vwmanual.ru)
7. Disconnect the wiring connector (arrow) from terminal 50 (figure 9.4).
Figure 9.4. Disconnect the wiring connector (arrow) from terminal 50.
8. Disconnect the wire from terminal 30 of the solenoid relay (figure 9.5).
Figure 9.5. Disconnect the wire from terminal 30 of the solenoid relay.
9. Unscrew the bolts (arrows) and remove the starter 1 (figure 9.6).
Figure 9.6. Unscrew the bolts (arrows) and remove starter 1.
Installation
10. Installation is carried out in the reverse order of removal.
4-cylinder engines
Removal
11. Disconnect the negative cable from the battery.
12. Disconnect the wiring connector (arrow) from terminal 50 (figure 9.7) Disconnect the wire from terminal 30 of solenoid relay 2.
Figure 9.7. Disconnect the wiring connector (arrow) from terminal 50. Disconnect the wire from terminal 30 of solenoid relay 2.
13. Unscrew bolts 2 and remove starter 1 (figure 9.8).
Figure 9.8. Unscrew bolts 2 and remove starter 1.
Installation
14. Installation is carried out in the reverse order of removal.
Visitor comments