2. Slide the clutches of the locking mechanisms for fastening the cables for engaging and selecting a gear all the way forward in the direction indicated by the arrow (1), then lock the locking mechanisms in the open position by turning the couplings in the direction of the arrow (2).
3. Lock the gear selector rod as follows:
- press the gear selector rod in the direction of the arrow (1);
- while turning the lock (A) in the direction indicated by the arrow (2), and push the retainer into the selector shaft.
4. Lock the shift lever in neutral position by inserting a rod of suitable diameter at the same time into the holes (A) And (IN).
5. Turn the couplings of the levers of inclusion and selection of gears in the directions indicated by the arrows. In this case, the spring will return the locking mechanism to its original position.
6. Return the selector rod retainer to its original position and remove the selector lever retainer shaft.
Visitor comments