Checking the axial run-out of the camshaft (VW Caddy 3)

The measurement is taken with the tappets removed and the first, third and last bearing caps installed.

Maximum permissible value: no more than 0.15 mm.

Apply a thin, even layer of sealant to the surfaces (1). Be careful not to allow the sealant to get into the grooves (arrows).

Apply a thin, even layer of sealant to the surfaces (1). Be careful not to allow the sealant to get…

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

The text has been checked: Kolesnikov Artem

Previous articles
List of components and parts of the valve mechanism
Camshaft, valves and pump-injector drive
Removal and installation the cylinder head
Installing the valve cover
Checking the cylinder head for warpage
List of parts and assemblies of the cylinder head

Next articles
Valve sizes
Removal and installation the camshaft

Similar articles from other manuals for VW cars:
Checking the camshaft drive toothed belt Passat B6 (2005-2010)
Checking the camshaft (engine with hydraulic tappets) Golf 2 (1984-1993)
Checking the levels of the main working fluids Polo 3 (1995-2003)
Checking the axial displacement of the camshafts Touareg 1 (2002-2006)
Checking the operation of the intake manifold flap Tiguan 1 (2007-2015)
Checking the engine oil level and replacing it Sharan 1 (1995-2000)
Checking and adjusting the axial play of the crankshaft Transporter T3 (1979-1992)

Checking the axial run-out of the camshaft (VW Caddy 3)

Visitor comments