Contents: Removal ↓ Installation ↓
Removal
Remove the brake drum.
Unscrew the 4 bolts securing the rear wheel hub bearing cover and remove the cover.
Remove the oil seal using a crowbar.
Installation
Press in a new seal using a press or hammer (in the second case, use a wooden spacer). Fill the seal lips with general purpose grease.
Install the bearing cover, not forgetting the spacer sleeve, tighten the cover mounting bolts to a torque of 60 Nm (6.0 kgfm).
Caution! Use only grade 10.9 bolts!
Install the brake drum.
Visitor comments