Front wheel brakes: 1 - pressure washer (do not distort, otherwise the regulation will be violated. After adjusting the wheel bearing play, tighten to 10 Nm (Max. 13 Nm)); 2 - hub cap (install without lubrication); 3 - hub nut (see section "Checking and adjusting wheel bearing play"); 4 - outer wheel bearing (external rotating cage knocked out by a rod); 5 - inner wheel bearing (external rotating cage knocked out by a rod); 6 - brake disc; 7 - support (when working on the front suspension, do not disconnect the brake hose, but only hang it on a wire in a suitable place); 8 - a rotary fist of a disk brake; 9 - brake shield; 10 - 40 Nm (lock by bending the lock washer); 11 - oil seals (different for drum and disc brakes; pound out with a rubber mallet); 12 - support with brake pads (included); 13 - brake drum; 14 - spring ring and bolt (50 Nm (5.0 kgcm)); 15 - drum brake knuckle.
Front wheel brakes: 1 - pressure washer (do not distort, otherwise the regulation will be violated. After adjusting the wheel bearing play, tighten to 10 Nm (Max. 13 Nm)); 2 - hub cap (install without lubrication); 3 - hub nut (see section "Checking and adjusting wheel bearing play"); 4 - outer wheel bearing (external rotating cage knocked out by a rod); 5 - inner wheel bearing (external rotating cage knocked out by a rod); 6 - brake disc; 7 - support (when working on the front suspension, do not disconnect the brake hose, but only hang it on a wire in a suitable place); 8 - a rotary fist of a disk brake; 9 - brake shield; 10 - 40 Nm (lock by bending the lock washer); 11 - oil seals (different for drum and disc brakes; pound out with a rubber mallet); 12 - support with brake pads (included); 13 - brake drum; 14 - spring ring and bolt (50 Nm (5.0 kgcm)); 15 - drum brake knuckle.
Visitor comments