1 - brake disc
It is necessary to replace both disks of one bridge. To remove, first unscrew the support mount. Remove the brake disk from the wheel hub without using force, if necessary, use a rust converter.
2 - Phillips head screw, 4 Nm
3 - brake pads
With wear sensor. Replace all pads of one bridge at once.
4 — brake caliper
5 - guide pin
6 - protective cap
7 — unloading sleeve
8 - brake hose
With ring nipple and hollow bolt, 35 Nm.
9 — wheel hub
10 - Hexagon head bolt, 10 Nm
11 - protective screen
12 — steering knuckle
13 — ABS speed sensor
Before installing the sensor, clean the inner surface of the hole and lubricate it with plastic grease G000650.
14 - Allen head bolt, 8 Nm
Visitor comments